Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Dryer Vent Cleaning in Fort Worth: What to Know First
Rotobrush dryer vent cleaning in Fort Worth typically runs $150 to $285 for a standard single-family home, and most jobs are completed in under 90 minutes. We’re an independent Rotobrush service provider, which means we clean and maintain vent systems on Rotobrush-built homes and dryer vent setups without being tied to any manufacturer’s script. If you own a home in Fort Worth with Rotobrush ductwork or a Rotobrush-installed vent system, this page tells you exactly what we see in the field, what it costs, and how to get it handled. Call (817) 730-6759 for a free estimate.
How Rotobrush Products Fail – and How We Fix Them
Rotobrush builds solid equipment, but every vent system has weak points that show up with time, Texas heat, and lint loads. Here’s what we actually encounter on Fort Worth jobs:
- The Rotobrush aiR+ and RotoSweep lines: lint packing at the first elbow. These systems push air hard, and when the vent run hits its first 90-degree bend, lint doesn’t always make it through cleanly. In Fort Worth, where homes run dryers hard through summer, we regularly find dense lint plugs forming right at that first elbow within 12 to 18 months of the last cleaning. Our fix is a full disconnection at the dryer, a visual inspection with a borescope, and a dual-direction cleaning that breaks the plug loose before pulling it out with negative pressure.
- Rotobrush-recommended flex transitions: crushing and kinking. A lot of Fort Worth laundry rooms got Rotobrush’s semi-rigid flex transition installed behind the dryer. It’s good material, but when the dryer shifts, that transition crushes against the wall. A crushed transition cuts airflow by more than half, which means longer dry times and more lint staying in the vent. We replace crushed runs with rigid or appropriately sized semi-rigid transitions and hold them with proper clamps, not tape.
- The RotoSweep brush plates: worn bristles on older systems. Rotobrush’s older rotary brush plates were great for duct cleaning, but after years of service, the bristles wear down and leave a thin film behind. That film is sticky and grabs lint fast. We see this on homes in neighborhoods like Wedgwood and Ridglea where the original RotoSweep systems went in 15 to 20 years ago. We clean the full vent path with our Rotobrush brush systems, then run a Nikro HEPA vacuum to pull the film residue and loose lint out, not just knock it around.
- Bird and rodent entry at the exterior vent cap. Fort Worth’s wind and wildlife are hard on exterior terminations. Rotobrush vent caps without proper bird guards become nesting sites, especially in areas near the Trinity River corridor and older tree-lined streets in Berkeley Place. We install bird guards, replace damaged caps, and make sure the termination opens fully when the dryer runs and seals when it’s off.
- OEM Rotobrush vent cap degradation in direct sun. The plastic and thin-gauge metal some Rotobrush vent caps use doesn’t love Texas sun. After a few Fort Worth summers, caps warp, the flapper sticks open, and wind-driven rain gets in. We replace failed caps with heavier-gauge metal terminations that close reliably. The cap is a $40 to $80 part, and it’s the difference between a clean vent and a vent that clogs again in six months.
Styles & brands we work with




Our Rotobrush Dryer Vent Cleaning Process
Here’s how a Rotobrush dryer vent cleaning goes from the first call to the final walkthrough at Cardinal Air Duct Fort Worth:
- 1
You call (817) 730-6759. A live person answers, every time. We ask about your dryer, your vent run, and any signs you’ve noticed: longer dry times, a hot dryer cabinet, a burning smell, or a vent that hasn’t been touched in years.
- 2
We confirm the job and give you a written price. Before anything starts, you get a written price for the full job. No per-vent add-ons, no surprise line items when the tech arrives.
- 3
The tech arrives with a trackable arrival window. We send a live link so you know when we’re showing up. Our technicians are background-checked, uniformed, and they’ll tell you their name before they knock.
- 4
We disconnect, inspect, and clean. We pull the dryer out enough to disconnect the transition, inspect the full vent path with a borescope, then run a Rotobrush brush system through the line while a Nikro HEPA vacuum pulls debris out under negative pressure. The loosened lint goes into the collection unit, not back into your laundry room.
- 5
We test and verify. We reconnect everything, run the dryer on a no-heat cycle, and check airflow at the exterior vent. You get before-and-after photos of your vent interior so you can see what came out.
- 6
You get a digital invoice and the 365-Day Done Right Promise. Pay from a link on your phone. If the work isn’t right within 365 days, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Rotobrush Dryer Vent Cleaning Costs in Fort Worth
Most Rotobrush dryer vent cleanings in Fort Worth land between $150 and $285. The price depends on the vent run length, how many bends are in the line, how long it’s been since the last cleaning, and whether we’re also replacing a transition, cap, or adding a bird guard. A straight, short vent on a single-story house in south Fort Worth might run $150 to $180. A second-floor laundry with a 20-foot vent run and two elbows in a neighborhood like Alliance could push $250 to $285. If the vent is fully blocked or has animal nesting, that adds time and usually moves the price toward the top of the range. We give you the written price before anything starts, and that number doesn’t change at the door. Call (817) 730-6759 and we’ll walk you through it.
Why Fort Worth Homeowners Call Cardinal Air Duct Fort Worth for Rotobrush Work
Most Fort Worth homeowners don’t want to micromanage a service call. They want a real person on the phone, a tech who knows the equipment, and a price that holds. That’s what we do. We run Rotobrush brush systems daily, we know the weak points on Rotobrush vent runs in this city, and we carry Nikro HEPA vacuums and Abatement Technologies containment units on every truck. We also service and clean around Lennox, Trane, and Carrier HVAC equipment, so when your Rotobrush vent cleaning turns into a conversation about the rest of your air system, we can handle that too. The 365-Day Done Right Promise is the same on every job: if it’s not right, we come back and make it right at no charge. That’s the standard Omar Haddad built this Fort Worth crew on.
FAQs
No. As an independent Rotobrush service provider, we clean the vent system and its components without modifying the equipment in ways that would void a manufacturer’s warranty. We use brush and vacuum methods that match what Rotobrush themselves use for vent cleaning. If we find a failed Rotobrush component, we’ll tell you before replacing anything and lay out OEM versus quality aftermarket options so you can make the call.
Most Rotobrush dryer vent parts, like vent caps, transitions, and bird guards, are available locally or within a day or two. For Rotobrush-specific internal brush components, we carry the common sizes on our trucks. If it’s a less common part, we’ll quote you a timeline before we order anything. Call (817) 730-6759 and we’ll tell you what’s in stock for your setup.
We show you before-and-after photos of the vent interior, taken with a borescope camera during the job. The photos show the lint load before, the clean vent after, and the debris we pulled out. If the photos don’t satisfy you, our 365-Day Done Right Promise means we return and correct the work at no charge for a full year.
For most Fort Worth homes, every 12 to 18 months. If you have a long vent run, a second-floor laundry, dogs that shed, or you run the dryer more than four times a week, lean toward every 12 months. Fort Worth’s clay-heavy soil means more dust in the air, and that dust ends up in the lint stream. Call (817) 730-6759 for a free estimate, and we’ll give you a straight recommendation based on your setup, not a generic calendar.
Written by Omar Haddad, Owner, Cardinal Air Duct Fort Worth at Cardinal Air Duct Fort Worth, serving Fort Worth and nearby areas.