Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Everman
Dryer vent cleaning in Everman typically runs $140 – $260 for a standard single-dryer home, and most jobs are completed in under two hours. If you live near Enon Avenue, Trammell Road, or in the older neighborhoods south of Everman Parkway, we know exactly what your vent run looks like before we even arrive. Everman’s homes hold a particular set of problems: decades-old ductwork, caliche dust from unpaved alleys, and pier-and-beam crawl spaces that hide crushed or disconnected runs. Call (817) 730-6759 for a free estimate. You’ll get a written price before the first tool comes off the truck.
Why Cardinal Air Duct Fort Worth Is Everman’s Preferred Dryer Vent Cleaning Company
We’re the air duct specialist inside the Relay Home Co. family, founded 2005. In Everman that matters because this work rarely stops at the dryer. Older homes with original sheet metal ductwork and low wall returns pull in far more than lint. Our techs see the same block-by-block patterns on Enon, on Townley, over by Johnson Park. We handle the whole system: the dryer vent itself, the return, the supply run, the crawl space connection. Omar Haddad leads the crew, and every booking carries The Relay Visibility Guarantee: a live trackable arrival window, before-and-after photo proof, and a digital invoice payable by link. No one standing in your driveway guessing at a final number.
We answer calls 24/7 with a live person. When a Everman homeowner calls at 7 a.m. because a dryer vent has been capped by a bird or crushed by a shifted pier, the phone rings in the DFW metro office and a real coordinator picks up. That same day, a background-checked, uniformed technician with a Rotobrush and Nikro HEPA vacuum is routed to Everman. We don’t route from a call center that’s never seen a pier-and-beam floor.
Every job ends with a written guarantee and the 365-Day Done Right Promise. If the vent isn’t right within a full year, we come back and make it right, at no charge. That’s not a promotional add-on for Everman customers. It applies to every single booking.
Styles & brands we work with
Dryer Vent Cleaning Service in Everman
Dryer Vent Cleaning Service in Everman starts with a camera inspection of the entire run, from the dryer connection at the wall to the exterior vent cap. We don’t clean blind. Our techs use Rotobrush systems with negative-pressure extraction, which means the brush loosens the lint and the Nikro HEPA vacuum pulls it straight out of the pipe, not into your laundry room. In Everman’s 1950s and 60s homes, this inspection step is crucial because the visible lint trap often lies. The inside trap clean means nothing if the run under the floor is sagging, rusted through, or packed with a mat of lint and caliche dust. A standard Dryer Vent Cleaning in Everman runs $140 – $260. We give that as a written price before work begins.
Vent Rerouting and Cap Work
Often the real fix in Everman is rerouting the vent. Original installs from decades ago snake through impossible angles, flex hose crushed behind pier-and-beam skirting, or route dump directly into a crawl space instead of outside. We replace damaged runs with rigid metal duct, seal the joints, and install a proper vent cap with a bird guard where needed. That’s the work that actually makes a dryer function again.
Lint Removal and Bird Guard Installation
Lint removal here isn’t a quick brush-through. In Everman’s humid summers, lint inside older runs absorbs moisture and hardens into a sludge that a standard brush skips over. Our agitation tools break it loose, and the negative-pressure extraction carries it out. We also install bird guards and replacement caps on most exterior terminations we touch, because starlings and sparrows nest in vent hoods along these older rooflines with surprising frequency.
Dryer Vent Installation in Everman
Dryer Vent Installation in Everman matters most in the older housing stock that makes up much of this city. A 1960s brick home on Enon Avenue still runs the original galvanized pipe, and decades of hot, humid summers plus caliche dust have done what they do. We arrive with rigid metal duct, proper clamps, foil tape, and a clear plan for termination. A complete installation runs $325 – $625 depending on run length and whether we’re going through a wall, up through the roof, or across a crawl space. Written price agreed before a single cut is made.
Replacing Crushed Runs Under Pier-and-Beam
Pier-and-beam homes shift. Piers settle, floors flex, and the dryer vent that once lay flat under the joists ends up pinched or severed. We remove the damaged section, install new rigid duct with sealed joints, and re-route it cleanly. This isn’t cosmetic work. A crushed vent is a fire hazard and a moisture pump feeding humid air back into the crawl space.
Sealing Old Joints and Crawl Space Connections
Original metal ductwork in Everman homes frequently has unsealed joints pulling in dirt from under the house. That’s why a vent clogs from the inside even when the trap is clean. During an installation, we seal every joint and verify the termination point with a camera before we call it done.
Trusted Brands We Service in Everman
We work on all major dryer brands: Whirlpool, Maytag, Kenmore, LG, Samsung, and Electrolux. That’s the appliance side. On the air side, we run Rotobrush rotary brush systems with Nikro HEPA extraction, and we stock a full kit of rigid duct, caps, and Guardsman filtration products in our local DFW service vehicles. For Everman customers, that means no second trip to a supply house. The right parts come with the tech.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Everman Homes
- Low wall returns pulling in caliche dust. In many Everman slab homes, the return air registers sit just a few inches above the floor. Grit from unpaved alleys gets kicked up and drawn straight into the system, mixing with dryer makeup air and clogging the vent quickly.
- Sagging runs under pier-and-beam floors. Lint pathways droop into low spots over time. During humid summers, condensation forms there and turns the lint into a hardened sludge that resists standard brushing.
- Crushed or disconnected duct sections. A shifted pier can flatten a vent run overnight. Airflow drops to nearly nothing, the dryer runs longer, and the moisture sensor trips repeatedly. The trap looks clean. The pipe is destroyed.
- Unsealed joints on original metal ductwork. Decades-old joints pull in dirt, insulation, and dust from the crawl space. The vent clogs from the wrong direction, and a standard clean that skips sealing won’t fix it for long.
Pricing for Dryer Vent Cleaning in Everman, TX
A standard dryer vent cleaning in Everman runs $140 – $260 for a single-dryer home with an accessible exterior termination. A full vent installation or replacement typically runs $325 – $625. If we find a crushed run that needs cutting out and replacing, that’s usually $180 – $300 as an add-on, and we show you the camera footage before we do the work. You get one written price before anything starts. Estimates are free. Call (817) 730-6759 and we’ll quote Everman jobs by phone in under ten minutes.
We Also Serve Cities Near Everman
If you’re just outside Everman, we cover Fort Worth, North Richland Hills, Keller, and Burleson regularly. Same crews, same written pricing, same 365-Day Done Right Promise. This page is about Dryer Vent Cleaning in Everman, but we know the whole southeastern Tarrant County area well.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Everman
Because the lint trap only catches what leaves the drum. In Everman, your vent is also pulling in caliche dust from unpaved alleys through low wall returns and around unsealed duct joints. That fine grit binds with humid-air moisture inside the vent and hardens into a mat. Cleaning the trap prevents one clog; it does nothing for the dirt route entering from below.
Call (817) 730-6759 for an inspection. We’ll put a camera through the run and show you exactly what’s inside.
Yes, in many cases we cut out the crushed section and splice in new rigid duct. The rest of the run gets camera-verified and sealed at the joints. It’s often a $180 – $300 add-on to a cleaning, depending on access and length. If the entire run is degraded, we’ll quote a full replacement and show you why before any work happens.
For Everman’s older homes and the dust load they carry, HEPA filtration is worth it. Our Nikro HEPA vacuums capture the fine caliche particles that a standard shop-style vacuum blows past the filter and back into your laundry room. You’re already breathing enough of that dust from the alleys. There’s no reason to aerosolize more of it during a cleaning.
Every 12 to 18 months for most Everman homes. If you have a pier-and-beam crawl space, an unpaved alley behind the house, or pets, lean toward 12. The humidity hardens lint faster here than in drier parts of DFW, and once it sets, simple brushing won’t remove it. We’ll camera-check and recommend a schedule after the first cleaning.
Sectional repairs run $180 – $300. A full re-run in rigid metal duct typically runs $325 – $625. You’ll see the camera image before we replace anything, and the written price won’t change at the door. Call (817) 730-6759 for a free estimate.
Written by Omar Haddad, Owner at Cardinal Air Duct Fort Worth, serving Everman and the surrounding area.