Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFull System Cleaning in Fort Worth, TX
Full system cleaning in Fort Worth typically runs $450 – $750 for a single-family home, takes 3 – 5 hours, and covers every component air touches: the return and supply ducts, the air handler, the evaporator coil, and the blower motor. At Cardinal Air Duct Fort Worth, we quote that price in writing before a single vent cover comes off. Call (817) 730-6759 and you’ll get a live person, a clear scope, and a firm number the same day.
Most homeowners call us for a basic duct cleaning and find out the job is bigger than the ductwork. That’s where full system cleaning comes in. It’s the thorough version of Air Duct Cleaning: everything from the return grille in your hallway to the coil sitting above your furnace gets cleaned, not just the metal tubes in between. If you’ve lived in your house more than three years and have never opened the blower compartment, there’s a good chance the full system is what you actually need.
When You Need Full System Cleaning
Residential Duct Cleaning alone handles the visible part of the system. Full system cleaning addresses what’s hiding where you can’t easily look. Here’s when Fort Worth homeowners typically call us for the full job rather than a basic duct pass:
- Your evaporator coil looks like a dirty filter. In Fort Worth’s humidity, the coil above your furnace traps wet dust all summer, then bakes it into a felt-like crust. That crust restricts airflow and makes your AC run longer. We see it constantly in older homes around Ridglea and TCU.
- You bought a house and don’t know the HVAC history. Previous owners rarely clean ducts, and almost never clean the blower. If you just closed on a home in the Near Southside or Wedgwood, a full system cleaning resets the clock and gives you a baseline.
- There’s a persistent musty smell when the AC kicks on. That smell is usually biological growth on the coil or in the drain pan, not just dust in the ducts. You need the coil cleaned and the pan treated, not just a vacuum pass through the vents.
- Dust returns within days of dusting. If you wipe a shelf on Monday and see film by Thursday, your blower is likely circulating fine particles back into the living space. Ducts carry the air but the blower and coil generate the dust load.
- Your energy bills climb in April and May. A fouled coil forces the compressor to work harder. Full system cleaning restores the coil’s heat exchange surface, which is the single biggest efficiency gain in the entire HVAC system.
- You have pets, kids, or allergy concerns. Hair, dander, and fine dust embed in duct lining and the blower wheel. A full system cleaning removes the reservoir, not just the surface layer. Families in Keller and Saginaw with multiple pets tend to call us every 2 – 3 years for this reason.
If two or more of these hit home, full system cleaning is the right call. If you’re unsure, call (817) 730-6759 and describe what you’re seeing. We’ll tell you straight whether you need the full job or a standard Air Duct Cleaning in Fort Worth.
Our Full System Cleaning Process
We follow a set sequence every time. No shortcuts, no skipping the parts that are hard to reach. Here’s how a full system cleaning goes with our crew:
- Inspection and written quote. The technician checks the return, supply plenum, coil, blower, and filter housing. You get a written price before any work starts, per The Relay Standard. If the coil doesn’t need it, we don’t sell it.
- Containment setup. We seal each supply register and the return opening to keep cleaning debris from drifting into your living room. Abatement Technologies containment units create negative pressure inside the duct system, so any loosened dust stays inside the system until we extract it.
- Source removal through the ducts. We run a Rotobrush rotary brush system through every supply and return line. The spinning brush knocks debris off duct walls while a Nikro HEPA vacuum pulls it out at the same time. That’s what “source removal” means: the material is gone from your house, not just pushed down the line.
- Coil and blower cleaning. Here’s where full system cleaning goes past basic duct work. We access the evaporator coil, apply a commercial coil cleaner, rinse it properly, and clear the drain line. The blower wheel and housing get brushed and vacuumed out. This is the step that actually lowers your runtime and fixes the musty smell.
- Filter replacement and system reassembly. We install a fresh filter from Guardsman or Honeywell depending on what your system takes, re-seal all access panels, and button everything back up.
- Before-and-after photos. Per The Relay Standard, you get photos of the coil, blower, and duct interiors before and after. You’ll see exactly what you paid for, which most Fort Worth homeowners tell us is the first time a home service has ever shown them proof.
From arrival to final photo, a typical single-family home in Fort Worth takes 3 – 5 hours. You’ll know the tech’s name before they arrive, and you’ll watch their arrival time live on your phone. No four-hour windows, no “we’ll be there sometime between.”
Full System Cleaning Pricing in Fort Worth
Let’s talk real numbers, because you deserve to know what this costs before you commit. For a standard single-family home in Fort Worth, full system cleaning runs $450 – $750 depending on system size, accessibility, and how clogged the coil is. That’s the complete job: all ducts, the coil, the blower, the return drop, and the filter.
Here’s how the pricing breaks down by component:
- Duct-only cleaning: $300 – $450 for a typical for a home with one air handler. This covers all supply and return lines, registers, and the return drop.
- Evaporator coil cleaning: $150 – $250 when added to a duct cleaning. This includes pulling the access panel, chemical or enzyme cleaning, rinsing, and drain line flush.
- Blower motor and wheel cleaning: $100 – $180. The blower wheel is where dust accumulates in ridges. We brush and vacuum every fin.
- Supply plenum and return plenum treatment: Included in the full system price.
- Filter replacement: Included. We carry Guardsman and Honeywell pleated filters; if you want an upgraded Aprilaire media filter, we’ll quote that separately.
Full system cleaning combines all of the above at a bundled price lower than booking each separately. What affects the final number:
- Number of supply registers. A 1950s bungalow in Riverside with 6 runs cleans faster than a 4,000-square-foot two-story in Walsh Ranch with 14.
- Coil accessibility. If your coil is in a cramped attic or a tight closet with no service clearance, it takes longer. That’s common in older Fort Worth homes with retrofitted AC.
- Severity of buildup. A coil that’s never been touched in 10 years takes multiple cleaning passes. We’ll quote it accurately after seeing it.
- Multiple air handlers. Two-story homes often have one system upstairs and one downstairs. Each system is priced separately.
Every quote comes in writing before work starts, and that number does not change at the door. No surprises, no add-on pressure. Call (817) 730-6759 for a free estimate, and we’ll give you a firm range based on your square footage and system type.
And here’s the long-term piece: the 365-Day Done Right Promise covers every full system cleaning we do in Fort Worth. If the work isn’t right within 365 days, we return and correct it at no charge. That’s not a warranty with fine print. It’s a year-long commitment, in writing, on every job. Omar Haddad stands behind every cleaning with his name on the invoice.
FAQs – Full System Cleaning
How much does full system cleaning cost in Fort Worth?
Full system cleaning in Fort Worth typically costs $450 – $750 for a single-family home, including all ducts, the evaporator coil, the blower motor, and a new filter. Your exact price depends on the number of registers, system accessibility, and how much buildup is present. Call (817) 730-6759 for a written quote, free of charge, before you decide anything.
Can you do full system cleaning the same day?
In most cases, yes. We keep same-day and next-day slots open for Fort Worth homeowners, and a live person answers 24/7 to book them. Tell us your square footage and we’ll confirm a window, with live arrival tracking from The Relay Standard so you know exactly when the tech pulls up. Call (817) 730-6759 and we’ll get you scheduled.
Is full system cleaning worth it compared to just cleaning the ducts?
If your coil or blower is dirty, yes, absolutely. Cleaning only the ducts while leaving a crusted coil in place is like washing the hallway but not the kitchen. The coil is where air gets coldest, and where Fort Worth humidity causes the heaviest buildup. Full system cleaning costs more than duct-only but delivers the actual result you’re looking for: cleaner air, better airflow, and lower AC runtime. Our techs will show you before-and-after photos so you can decide from evidence, not a sales pitch.
How long does full system cleaning take?
Plan on 3 – 5 hours for a standard single-family home in Fort Worth. Larger two-story homes with two air handlers take longer, sometimes a full day. You’ll be notified of a precise window before we arrive, and the technician’s live location is visible on your phone throughout. Call (817) 730-6759 and we’ll give you a realistic time estimate for your specific house.
Do you clean the evaporator coil in the attic too?
Yes. Full system cleaning includes attic evaporator coils, closet-mounted coils, and horizontal coils in crawl spaces. Attic coils are common in Fort Worth homes from the 1960s through the 1990s, especially in neighborhoods like Arlington Heights and Handley. They trap dust and lint from attic insulation, so skipping them would miss a major source of your airflow problem. We access, clean, rinse, and photograph every coil we work on.
Is your full system cleaning safe for pets and kids?
Yes. We use commercial cleaning products that are safe for indoor air quality once applied, and we run HEPA filtration from Nikro throughout the job to capture fine particles before they leave the system. If anyone in your home has respiratory sensitivities, let us know when you book. We can sequence the work to minimize exposure and run the system through a post-clean cycle before we leave. Call (817) 730-6759 and mention it; we’ll plan accordingly.
Why Fort Worth Homeowners Choose Cardinal Air Duct Fort Worth
Fort Worth has no shortage of duct cleaning companies. Most of them run a truck-mounted vacuum and call it a day. We run Rotobrush rotary brush systems, Nikro HEPA vacuums, and Abatement Technologies containment equipment because that’s what actually removes the debris, not just loosens it. The difference shows up in your photos and in the way your house smells the next morning.
We’re part of the Relay Home Co. family, founded in 2005, and we operate under The Relay Visibility Guarantee. That means a live trackable arrival time, before-and-after photo proof, and a digital invoice you can pay from a link. Every full system cleaning is backed by the 365-Day Done Right Promise. If it’s not right within a year, we come back and fix it. You’ll get a written price before any work starts, a written guarantee on the job, and a free second visit if anything fails. No other air duct company in Fort Worth matches that standard.
Ready to book? Call (817) 730-6759 now. You’ll reach a live person who can give you a firm price range, check availability for today or tomorrow, and get you on the schedule. Get home comfort back where it belongs.
Written by Omar Haddad, Owner at Cardinal Air Duct Fort Worth, serving Fort Worth.